Connecting The Ic Recorder To A Computer - Sony ICD-UX560F Help Manual

Help Guide
IC Recorder
ICD-UX560 / ICD-UX560F / ICD-UX565F

Connecting the IC recorder to a computer

To exchange files between your IC recorder and a computer, connect the IC recorder to the computer.
Slide the USB slide lever on the back of the IC recorder in the direction of the arrow to push out the
1
USB connector, and insert it into the USB port on a computer that is up and running.
Make sure the IC recorder is successfully detected by the computer.
2
On the Windows computer; open "Computer" or "PC," and make sure that "IC RECORDER" or "MEMORY CARD" is
detected.
On the Mac; make sure that an "IC RECORDER" or "MEMORY CARD" drive appears on the Finder.
The IC recorder is detected by the computer as soon as a connection is made. While the IC recorder is connected to the
computer, "Connecting" appears on the display window of the IC recorder.
Related Topic
Disconnecting the IC recorder from the computer
4-573-936-32(1) Copyright 2015 Sony Corporation
149