Sony ICD-UX570 Help Manual page 46

Press (move up) or
4
clock.
After the settings are reflected to the clock, the setting window for turning the beep sound on or off is displayed.
Press (move up) or
5
press (play).
When the initial settings finish, the completion message and then the HOME menu appear.
Note
If you take 30 seconds or longer before proceeding to the next step, the display window will turn off. To turn on the display
window for continuing the initial settings, press BACK/HOME.
The default date display format depends on the country or region of your purchase.
The clock may tell the time either in 12-Hour format with [AM] or [PM] or in the 24-Hour format, depending on the selected clock
display format (Time Display) on the Settings menu. In addition, the default clock display format depends on the country or region
of your purchase.
The number of language options you can select and the default setting differ depending on the country or region of your
purchase.
Hint
You can change the clock setting and the beep sound setting at any time later by selecting [
from the HOME menu.
When you are finished with the initial settings, placing your IC recorder into the HOLD state displays the current date and time on
the display window.
Related Topic
Selecting the display language (Language)
Setting the clock (Date & Time)
Selecting the date display format (Date Display Format)
Selecting the clock display format (Time Display)
Turning the beep sound on or off (Beep)
Display window while the HOME menu is displayed
(move down) to select [Next], and then press
(move down) to select [ON] or [OFF] to turn on or off the beep sound, and then
(play) to apply the settings to the
46
Settings] - [Common Settings]