Help Guide | Connecting The Ic Recorder To Your Computer - Sony ICD-PX333F Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
FM radio (ICD-PX333F only)
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-PX333/PX333F
Back Back to Top
Connecting the IC recorder to your computer
To exchange files between the IC recorder and your computer, connect the IC
recorder to your computer.
1. Connect the (USB) connector of the IC recorder with the USB port of your
running computer with the supplied USB connecting cable (
connectors securely until each plug stops to the end.
2. Make sure the IC recorder has been recognized properly.
On the Windows screen; open "My Computer" or "Computer," and make sure
that "IC RECORDER" or "MEMORY CARD" has been recognized.
On the Mac screen; make sure that an "IC RECORDER" or "MEMORY CARD"
drive is displayed on the Finder.
The IC recorder is recognized by the computer as soon as the connection is
made. While the IC recorder is connected to the computer, "Connecting" is
displayed in the display window of the IC recorder.
Note
If you connect more than two USB devices to your computer, normal operation
will not be guaranteed.
Use of this IC recorder with a USB hub or a USB connecting cable other than
the supplied cable is not guaranteed.
A malfunction may occur depending on the USB devices connected at the same
time.
Before connecting the IC recorder to your computer, check that the batteries
are inserted in the IC recorder.
It is recommended that you disconnect the IC recorder from the computer
when you are not using the IC recorder connected to the computer.
183
Search
Print
) inserted into the
Go to Page Top