Help Guide
IC Recorder
ICD-UX570 / ICD-UX570F
Reducing noise during recording (Recording Filter)
With the Recording Filter function, you can reduce noise in the recordings.
Select [
Settings] - [Recording Settings] - [Recording Filter] from the HOME menu, and then press
1
(play).
Press
(move up) or
2
Press and hold BACK/HOME to return to the HOME menu.
3
To return to the screen before you displayed the HOME menu, press
Description of menu items
You can select one of the following items:
OFF:
Turns off the Recording Filter function (default setting).
NCF(Noise Cut):
Cuts high-frequency sounds except for human voices as well as low-frequency sounds.
LCF(Low Cut):
Cuts low-frequency sounds, including noise from projectors and roaring wind sounds.
Note
While [Audio IN] is selected for [Ext. Input Setting] or FM radio recording (ICD-UX570F only) is in progress, the Recording Filter
function does not work.
[NCF(Noise Cut)] is optimized for voice recording. When [For Music] is selected for [Manual] under [Built-In Mic Sensitivity], the
Recording Filter function is disabled.
Hint
To cancel the Recording Filter function setup process, select [OFF] in step 2.
(move down) to select [NCF(Noise Cut)] or [LCF(Low Cut)], and then press
STOP.
138
(play).