Homematic IP HmIPW-SMI55 Installating Instruction And Operating Manual page 43

• After power supply is established, the device will
be active for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(G) shortly (see figure 7).
• Please wait until teach-in is completed.
• If connection of the device was successful, the
LED lights up green. The device is now ready for
use.
• If the LED lights up red, please try again.
• After a short time, the newly connected device
appears in the inbox of your software interface.
Start-up
43