Start-up
•
combine
Homematic IP devices via the Homematic IP
Access Point (HmIP-HAP).
5.4.1
Connecting to the Central Control Unit CCU3
To control and configure Homematic IP wired devices
software-based and comfortably as well as use it in cen-
tral control unit programs, you have to connect it to to
the WebUI. To connect the device to the Central Control
Unit CCU3, proceed as follows:
•
Set up your Central Control Unit CCU3 as
described in the operating manual and connect
the Homematic IP Wired Access Point.
•
Start the user interface "WebUI" on your
computer.
•
Click the "Teach-in devices" button on the right-
hand side of the screen.
•
To activate teach-in mode, click "Teach-in HmIP
device" in the next window. The teach-in mode
of the Central Control Unit will be activated for
60 seconds. An information box shows how
much teach-in time remains.
42
wired
devices
with
wireless