Teaching-In - Homematic IP HmIPW-SMI55 Installating Instruction And Operating Manual

5.4

Teaching-in

Please read this entire section before starting
the teach-in procedure.
Please refer to the Homematic IP Wired System
Manual for detailed information on setup and
control options.
To integrate the device into your system and enable
it to communicate with other devices, you must teach
it in first. You can use the following set-up and control
options:
Connecting to the Central Control Unit CCU3
For local, software-based configuration and control via
PC, you can connect the presence sensor to a Central
Control Unit CCU3 and to use it in comprehensive
programs (see „5.4.1 Connecting to the Central Control
Unit CCU3" on page 42).
Connection to the Homematic IP cloud
For a flexible control via free smartphone app, con-
nect the device to the Homematic IP cloud (see „5.4.1
Connecting to the Central Control Unit CCU3" on page
42). You can
• control the wired system via smartphone app
using the Homematic IP Wired Access Point
(HmIPW-DRAP) or
Start-up
41