Function test
6
Function test
The function test is only activated if the motion
detector has already been taught-in.
Up to 10 minutes after connecting the device or estab-
lishing the power supply (if the device has already been
connected), the device LED (G) indicates detected move-
ments. Meanwhile, the device LED flashes green. In this
way, the detection range and sensitivity can be checked
directly on the device.
7
Operation
The two push-buttons or channels (D + F) are used for
wireless control of other Homematic IP devices and
functions.
You can define the push-button functions according to
your personal needs, e.g. for comfortably switching lights
on and off, to activate or deactivate the eco mode or to
move shutters up or down.
46