Restore factory settings
1x orange
and 1x green
lighting (after
establishing
power supply)
9
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the device, please pro-
ceed as follows:
•
Press and hold down the system button (G) for 4
seconds until the LED (G) quickly starts flashing
orange (see fig. 9).
•
Release the system button again.
•
Press and hold down the system button again for
4 seconds, until the LED lights up green (see fig-
ure 10).
•
Release the system button to finish the proce-
dure.
The device will perform a restart. After the restart, you
can again integrate your device into your Homematic IP
system.
48
Test display
After the test
display
has stopped,
you can continue.