Replacing A Front Turn Signal/Parking And Side Marker Light Bulb - Acura 2010 TSX Owner's Manual

Lights
Replacing a Front Turn Signal/
Parking and Side Marker Light
Bulb
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
434
HOLDING CLIP
SCREW
2. Use a flat-tip screwdriver to
remove the holding clip from the
inner fender, and remove the
screw with a Phillips-head
screwdriver.
3. Pull the inner fender cover away
from the fender and bumper.
2010 TSX
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.