To Play A Disc - Acura 2010 TSX Owner's Manual

4. Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system will
then begin playing the last disc
loaded.
If you stop loading discs before all
six positions are filled, the system
will wait for 10 seconds, stop the load
operation, and begin playing the last
disc loaded.
To load a single disc:
Press and release the LOAD
1.
button.
2. ''NO DISC'' is shown on the screen
for an empty position in the
changer. When the green load
indicator comes on and you see
''DISC LOAD'' in the center
display, insert the disc into the slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way.
Playing Discs (Models with navigation system)
Do not try to insert a disc until
''DISC LOAD'' appears. You could
damage the audio unit.
You can select the position to load a
disc. Turn the interface knob or
press a preset button to select the
position, then press ENTER on the
selector. This starts the loading
sequence. If you do not select the
position, the system loads the disc to
the first empty position in numerical
order.
If you press the LOAD button while
a disc is playing, the system will stop
playing that disc and start the
loading sequence. It will then play
the disc just loaded.
2010 TSX

To Play a Disc

Select the changer by pressing the
DISC button. The system will begin
playing the last selected disc in the
disc changer. You will see the
current disc position highlighted.
CURRENT DISC
To select a different disc, press the
corresponding number on the preset
buttons, or turn the interface knob to
highlight the desired disc number,
then press ENTER on the interface
selector.
CONTINUED
247