Replacing A Fog Light Bulb - Acura 2010 TSX Owner's Manual

Replacing a Fog Light Bulb

If equipped
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment should
be done by your dealer or another
qualified technician.
2010 TSX
HOLDING CLIPS
UNDER COVER
1. Remove the three holding clips
with a flat-tip screwdriver.
2. Pull down the under cover from
the bumper carefully.
Lights
CONTINUED
439