Selecting A Memorized Position - Acura 2010 TSX Owner's Manual

To cancel the storing procedure
after pressing the SET button, do
any of the following:
Fail to press a memory button
within 5 seconds.
Readjust the seat position.
Turn the ignition switch out from
the ON (II) position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.

Selecting a Memorized Position

MEMORY BUTTONS
To select a memorized position, do
this:
1. Make sure the parking brake is set
and the shift lever is in Park
(automatic).
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
2010 TSX
Driving Position Memory System
The system will move the driver's
seat to the memorized position. The
indicator in the selected memory
button will flash during movement.
When the adjustment is complete,
you will hear two beeps, and the
indicator will stay on.
On vehicles with manual transmission
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
CONTINUED
143