Replacing A Front Position/Side Marker Light Bulb - Acura 2006 RL Owner's Manual

Main Menu Table of Contents
4. Install the new bulb into the
socket.
Insert the socket back into the
5.
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
6.
the new bulb is working.
7. (Driver's side)
Reinstall the battery and the
battery cover.
8. Reinstall the engine compartment
side cover.
Replacing a Front Position/Side
Marker Light Bulb
1. Remove the left or right side
engine compartment cover (see
page 362 ).
If you are replacing a driver's side
bulb, slide the battery toward the
engine to get more clearance (see
page 391 ).
(Passenger's side)
2.
Use a flat-tipped screwdriver to
remove the holding clip from the
windshield washer reservoir.
BULB
HOLDING CLIP
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Lights
CONTINUED
375