Rearview Camera And Monitor - Acura 2010 TSX Owner's Manual

Rearview Camera and Monitor

On vehicles with navigation system
REARVIEW CAMERA
Whenever you shift to reverse (R)
with the ignition switch in the ON
(II) position, the rearview is shown
on the navigation system screen.
For the best picture, always keep the
rearview camera clean, and do not
cover the camera lens. To avoid
scratching the lens when you clean it,
use a moist, soft cloth.
344
When in reverse, the navigation
system ''hard'' buttons are locked out,
except the '' '' button.
Pressing and releasing the button
allows you to switch the brightness
of the rearview camera image
between the night and the day
positions.
You can also adjust the brightness of
the rearview camera image by
turning the knob on the interface
dial.
The camera brightness cannot be
adjusted by voice control.
Since the rearview camera display
area is limited, you should always
back up slowly and carefully, and
look behind you for obstacles.
2010 TSX