Vehicle Stability Assist (Vsa) System Indicator; Vsa Activation Indicator - Acura 2010 TSX Owner's Manual

Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position.
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. You
will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display. Take your
vehicle to a dealer to have it checked.
Without VSA, your vehicle still has
normal driving ability, but will not
have VSA traction and stability
enhancement. For more information,
see page 392 .

VSA Activation Indicator

This indicator has three functions:
1. It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
It flashes when VSA is active (see
2.
page 392 ).
3. It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display.
2010 TSX
Instrument Panel Indicators
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. For more information, see
page 392 .
63