uuReplacing Light BulbsuFront Turn Signal Light Bulbs
Front Turn Signal Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal Light: 21 W
Screw
Inner
Fender
Bulb
278
1. Turn the steering wheel all the way to the
Clip (D)
opposite side from the light being replaced.
Passenger side: Turn the steering wheel to
the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips (A), (D) and screw,
pull the inner fender back.
Clips (A)
2 Engine Compartment Cover P. 259
3. Turn the socket to the left and remove it,
then remove the old bulb.
4. Insert a new bulb.
Socket
1Front Turn Signal Light Bulbs
Holding clip (D-type)
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Clip
Insert the clip with the pin raised, and push until it is
flat.
Push until the
pin is flat.