Operation; Switching On - Miele SmartLine CS 7611 Operating And Installation Instructions

Operation

Switching on

If you are operating a gas cooking
element next to a downdraft ex-
tractor, this will affect the gas cook-
ing element's function.
Place the FlameGuard between the
gas cooking element and the
downdraft extractor.

Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.
 Press in the relevant rotary control
and turn it anticlockwise to the large
flame symbol. The ignition electrode
will "click" and ignite the gas.
When the rotary control is operated, a
spark is automatically produced on all
burners. This is normal and does not
indicate a fault.
 When a flame is visible, keep the
rotary control pressed down for 5–
10 seconds, and then let it go.
 If the burner does not ignite, turn the
rotary control to the  position. Ventil-
ate the room or wait for at least
1 minute before trying again. When
making another ignition attempt, it
may be necessary to hold the rotary
control for longer.
 If the burner does not ignite the
second time, turn the rotary control
back to the  position and see "Prob-
lem solving guide".
24
Switching on during a power outage
If there is an interruption to the electri-
city supply, the gas can be ignited
manually, e.g. with a match.
 Press in the relevant control and turn
it anti-clockwise to the large flame
symbol.
 Hold the control pressed in and light
the gas at the burner with a match.
 Keep the control pressed in for a fur-
ther 5-10 seconds and then release it.