Burner - Miele SmartLine CS 7611 Operating And Installation Instructions

Cleaning and care

Burner

Do not clean any parts of the burners
in a dishwasher.
The surface of the burner cap will be-
come duller with time. This is com-
pletely normal and does not indicate
material deterioration.
 The burner should be dismantled and
then cleaned by hand using a solu-
tion of warm water and a little wash-
ing-up liquid applied with a soft
sponge.
 Clean any soiling from the flame
openings.

Danger of explosion.
Blocked flame openings can cause a
dangerous build-up of gas in the
base of the hob which could ignite
and cause an explosion. This can
lead to damage to the appliance and
injury.
Ensure the flame openings are kept
clean at all times.
 Parts of the burner that cannot be re-
moved should be wiped clean with a
damp cloth only.
 The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung-out cloth.
The ignitor must not get wet, other-
wise it will not spark.
 Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
30
The surface of the burner cap will be-
come duller with time. This is com-
pletely normal and does not indicate
material deterioration.
 Place the burner head  onto the
burner base  so that the thermo-
couple  and the ignition elec-
trode  extend through their respect-
ive holes in the burner head. The
burner head must click into place
correctly.
 Place the burner cap  flat over the
burner head . When correctly posi-
tioned, the burner cap will not slide
about.
Ensure that all parts of the burner are
reassembled in the correct order.