Information Display - Suzuki SX4/SX4 SEDAN Owner's Manual

INSTRUMENT PANEL

Information Display

EXAMPLE
(4) (5) (7)
(1) (2) (3)
(1) Clock
(2) Thermometer
(3) Instantaneous fuel consumption/Aver-
age fuel consumption/Driving range
(4) "H" button
(5) "M" button
(6) "DISP" button
(7) Freezing mark
(8) "SET" button
4-17
Clock (1)
The clock is shown when the ignition
switch is in the "ACC" or "ON" position.
To set the clock, follow the instructions
(6) (8)
below.
• To set the hour display, push the "H" but-
ton (4) repeatedly to advance the hour
display. To advance the hour display
quickly, hold in the "H" button (4) for
about 1 second and continue holding.
• To set the minute display, push the "M"
button (5) repeatedly to advance the
minute display. To advance the minute
display quickly, hold in the "M" button (5)
for about 1 second and continue holding.
80J035
Thermometer (2)
The thermometer shows the outside tem-
perature when the ignition switch is in the
"ON" position.
If the outside temperature nears freezing,
the mark (7) will come on when the display
shows the outside temperature.
NOTE:
The thermometer will not indicate the
actual outside temperature when driving at
low speed, or when stopped.
You can change the unit indication of the
thermometer between °F and °C.
To change the indication, follow the instruc-
tions below.
1) Hold in the "SET" button (8) for more
than 2 seconds.
The unit display of the thermometer will
blink.
2) Push the "SET" button (8) quickly to
change the indication between °F and
°C as shown in the illustration.
3) Hold in the "SET" button (8) for more
than 2 seconds, and the unit indication
will stop blinking.
If you don't push the "SET" button (8)
within about 8 seconds after the unit
display starts blinking, the unit display
will automatically stop blinking.
Fuel Consumption and Driving
Range (3)
This display can be changed to show
instantaneous fuel consumption, average
fuel consumption, or driving range. Also,
the display of fuel consumption can be
turned off if you desire.
80J089