Windshield Wiper And Washer Lever; Windshield Wipers - Suzuki SX4/SX4 SEDAN Owner's Manual

Turn Signal Operation
With the ignition switch in the "ON" posi-
tion, move the lever up or down to activate
the right or left turn signals.
Normal turn signal
EXAMPLE
Move the lever all the way upward or down-
ward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
Lane change signal
EXAMPLE
Some times, such as when changing
lanes, the steering wheel is not turned far
enough to cancel the turn signal. For con-
venience, you can flash the turn signal by
80JC033
moving the lever part way and holding it
there. The lever will return to its normal
position when you release it.
STEERING COLUMN CONTROLS
Windshield Wiper and Washer
Lever

Windshield Wipers

EXAMPLE
80JC034
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the
equipped), the wipers operate intermit-
tently. The "INT" position is very convenient
for driving in mist or light rain. In the "LO"
position, the wipers operate at a steady
low speed. In the "HI" position, the wipers
operate at a steady high speed. To turn off
the wipers, move the lever back to the
"OFF" position.
Move the lever up and hold it to the "MIST"
position, the windshield wipers will turn on
continuously at low speed.
MIST
OFF
INT
LO
HI
80JC035
"INT" position (if
3-6