Turn Signal Indicators - Suzuki SX4/SX4 SEDAN Owner's Manual

INSTRUMENT PANEL
If this light blinks in red, it reminds you that
the remote controller is not in the vehicle.
For details, refer to "Keyless Start System
Remote Controller/Keyless Entry System
Transmitter" in the "BEFORE DRIVING"
section.

Turn Signal Indicators

When you turn on the left or right turn sig-
nals, the corresponding green arrow on the
instrument panel will flash along with the
respective turn signal lights.
When you turn on the hazard warning
switch, both arrows will flash along with all
of the turn signal lights.
High Beam Indicator Light
This indicator comes on when headlight
high beams are turned on.
4-9
intelligent All Wheel Drive (i-AWD)
AUTO Indicator Light (if equipped)
When the ignition switch is turned to the
"ON" position, the light comes on briefly so
you can check that the light is working.
When the 2WD/i-AWD switch is in the "i-
AWD AUTO" mode with the ignition switch
50G055
in the "ON" position, the light comes on
and stays on.
If the light and the "i-AWD LOCK" indicator
light stay on or come on simultaneously
when driving, there may be something
wrong with the i-AWD system. Have the
system inspected
SUZUKI dealer.
If the oil temperature of the parts for i-AWD
system is high, this light will blink. The "i-
AWD AUTO" or "i-AWD LOCK" mode will
be changed to the "2WD" mode automati-
cally to prevent a damage of the parts for i-
AWD system.
NOTE:
If you restart the engine, the light will stop
50G056
blinking temporarily.
For details, refer to "Using the 2WD/i-AWD
Switch" in the "OPERATING YOUR VEHI-
CLE" section.
NOTE:
When the vehicle speed is increased, the
"i-AWD LOCK" mode will be changed to
the "i-AWD AUTO" mode automatically.
The "i-AWD AUTO" indicator light will come
on and stay on.
79J040
intelligent All Wheel Drive (i-AWD)
LOCK Indicator Light (if equipped)
When the ignition switch is turned to the
by an authorized
"ON" position, this light comes on briefly so
you can check that the light is working.
The light comes on when the 2WD/i-AWD
switch is changed to the "i-AWD LOCK"
mode from the "i-AWD AUTO" mode.
If the light and the "i-AWD AUTO" indicator
light stay on or come on simultaneously
when driving, there may be something
wrong with the i-AWD system. Have the
system
SUZUKI dealer.
inspected by an authorized
79J100