Suzuki SX4/SX4 SEDAN Owner's Manual page 108

INSTRUMENT PANEL
System Operating Instructions
Automatic operation
EXAMPLE
(1) (2)
You can let the climate control system work
automatically. To set the system in fully-
automatic operation, follow the procedure
below.
1) Set the desired temperature by turning
the temperature selector (1).
2) Turn the blower speed selector (2) to
the "AUTO" position.
3) Turn the air flow selector (3) to the
"AUTO" position.
Then the blower speed selector/air intake
selector (2) and air flow selector (3) are
controlled automatically to maintain the set
temperature.
The air conditioning switch (1) is to be
selected manually according to your taste.
4-31
When you turn the air conditioning switch
off, the climate control system cannot
lower the inside temperature below outside
temperature.
To turn the climate control system off, turn
the blower speed selector (2) to the "OFF"
position
NOTE:
• To find your comfortable zone, start with
the 75°F (25°C) setting.
• If you turn the temperature selector (1) to
the highest or lowest limit, the climate
(3)
control system will operate at the maxi-
mum cooling or heating and the blower
will run at nearly full speed.
• To avoid blowing cold air in cold weather
80J097
or hot air in hot weather, the system will
delay turning on the blower until warmed
or chilled air is available.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
• Even under the automatic operation, you
can set some of the blower speed selec-
tor/air intake selector (2) and air flow
selector (3) into manual mode. Then the
manually selected function is maintained
preferentially, and the other functions
remain under automatic operation.
• To return the air intake selector (2) to
automatic operation when both the
blower speed selector (2) and the air
flow selector (3) are in the "AUTO" posi-
tion, turn either the selector (2) or (3) to
a position other than "AUTO", then turn
to the "AUTO" position again.
(F)
EXAMPLE
Be careful not to cover the interior temper-
ature sensor (F) between the steering
wheel and the climate control panel, or the
solar sensor (G) located at the top of the
driver's side dashboard. These sensors
are used by the automatic system to regu-
late temperature.
Manual operation
You can manually control the climate con-
trol system. Set the selectors to your
desired position.
(G)
79J071