Lighting/Turn Signal Control Lever; Daytime Running Light (D.r.l.) System - Suzuki SX4/SX4 SEDAN Owner's Manual

STEERING COLUMN CONTROLS
Lighting/Turn Signal Control
Lever
Lighting Operation
EXAMPLE
To turn the lights on or off, twist the knob
on the end of the lever. There are three
positions: in the "OFF" position all lights
are off; in the middle position the front
parking lights, taillights, license plate light,
and instrument lights are on, but the head-
lights are off; in the third position the head-
lights come on in addition to the other
lights.
3-5
EXAMPLE
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
80JC031
beams (main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Daytime Running Light (D.R.L.)
System
The headlights light, but are dimmer than
the low beam, when the following three
conditions are all met. Also, the D.R.L. indi-
cator light on the instrument panel comes
on.
Conditions for D.R.L. system operation:
1) The engine is running.
2) The parking brake is released.
3) The lighting switch is at either the "OFF"
or the "Middle" position.
NOTE:
80JC032
Be sure to turn the lighting switch to the
third position at night or at any time of the
day when driving or weather conditions
require the headlights to operate at full
brightness and the taillights to be on.
Lights "On" reminder (if equipped)
A buzzer/chime sounds to remind you to
turn off the lights if they are left on when
the ignition key is removed and the driver's
door is opened.