Suzuki SX4/SX4 SEDAN Owner's Manual page 236

INSPECTION AND MAINTENANCE
3) When reinstalling wiper frame to arm,
install the wiper frame in the reverse
order of removal.
To remove and install some types of
rear wiper blade from and to the wiper
frame.
Removal
1) Flex the locked end of blade (3) away
from retainer (4) to unlock it and slide
the blade out as shown.
9-47
Installation
2) Install the new blade in the reverse
order of removal. Make sure that the
blade is properly retained by all the
hooks and the end is locked in place.
52D104
To remove and install some types of
rear wiper blade from and to the wiper
frame.
60A265
1) Flex the ends of blade and frame, and
slide the blade out as shown.
But do not flex the frame end more than
necessary.
If you do, it can break off.
2) Install the new blade in the reverse
order of removal. Make sure that the
blade is properly retained by all the
hooks and both ends are in place.
65D151