Fitting The Side Panels - Viessmann VITOCROSSAL Series Installation Instructions Manual

Fitting the side panels

A
3.
Fig. 19
1. Insert self-tapping screws (M6 x 12). Hook in the
guide rails. Tighten the screws.
2. To facilitate installation, place the bottom of the
side panels in the guide rails. Secure the side pan-
els loosely to the head rail of the boiler using 4
self-tapping screws (M 6 x 12). The side panels will
be aligned later.
Note
If gas pipes are to be routed along the side, break
out the perforated section in side panel
pliers.
20
2.
1.
4x
M6 x 12
3. Affix type plate
using
B
4x
M 6 x 12
B
to the right or left side panel.
A