Mounting The Burner; Burners Up To 80 Kw - Viessmann VITOCROSSAL Series Installation Instructions Manual

Mounting the burner

Note
All parts required for mounting the burner are con-
tained in the burner pack.

Burners up to 80 kW

4x
M 10 x 30
A
B
Fig. 6 Burners 80 kW
Ventilation air connection
A
Gas connection
B
1. Insert the burner.
!
Please note
Mechanical damage to delicate components
will impair the burner function.
Exercise great care when inserting the
burner into the combustion chamber. The
burner gauze assembly, electrodes and
insulation block must not be damaged.
2. Tighten screws until finger-tight. Tighten the
screws diagonally with a torque of 10 Nm.
11