Serverboard Features - Supermicro SuperServer 6014H-8 User Manual

S S
UPER ERVER 6014H-8/6014H-82/6014H-X8 Manual
One (1) CD-ROM containing drivers and utilities
SuperServer 6014H-8/6014H-82/6014H-X8 User's Manual
* "B" indicates black.
1-2

Serverboard Features

At the heart of the SuperServer 6014H-8/6014H-82/6014H-X8 lies the
X6DHR-8G/X6DHR-8G2/X6DHR-X8G, a dual Intel Xeon
serverboard designed to provide maximum
Processors
The X6DHR-8G/X6DHR-8G2/X6DHR-X8G supports single or dual Intel 604-
pin Xeon EM64T processors at an 800 MHz FSB speed. Please refer to the
support section of our web site for a complete listing of supported proces-
sors (http://www.supermicro.com/support/).
Memory
The X6DHR-8G2 has eight 240-pin DIMM slots that can support up to 16 GB
of low-profile, registered ECC DDR2-400 SDRAM. The serverboard has has
been designed to support 2 GB DIMM modules for each memory slot, but it has
only been validated with 1 GB memory modules.
The X6DHR-8G/X6DHR-X8G has eight 184-pin DIMM slots that can support
up to 16 GB of low-profile, registered ECC DDR333 SDRAM or 32GB of low-
profile, registered ECC DDR266 SDRAM.
designed to support 2 GB DIMM modules for each memory slot, but it has only
been validated with 1 GB memory modules.
Onboard SCSI
Onboard SCSI is provided with an Adaptec AIC-7902 SCSI controller chip,
which supports dual channel, Ultra320 SCSI at a burst throughput rate of
320 MB/sec. The X6DHR-8G/X6DHR-8G2/X6DHR-X8G provides two SCSI
ports. A QLogic GEM318 controller is used for the SAF-TE compliant SCSI
backpanel.
The serverboard has has been
1-2
TM
processor