Table of Contents
Advertisement
Advanced Serverboard Setup
This chapter covers the steps required to install processors and heatsinks
to the X6DHR-8G/X6DHR-8G2/X6DHR-X8G serverboard, connect the data
and power cables and install add-on cards.
connections are described and a layout and quick reference chart are in-
cluded in this chapter. Remember to close the chassis completely when you
have finished working on the serverboard to protect and cool the system.
5-1
Handling the Serverboard
Static electrical discharge can damage electronic components. To prevent
damage to printed circuit boards, it is important to handle them very care-
fully (see Chapter 4). Also note that the size and weight of the serverboard
can cause it to bend if handled improperly, which may result in damage. To
prevent the serverboard from bending, keep one hand under the center of
the board to support it when handling. The following measures are gener-
ally sufficient to protect your equipment from static discharge.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing any board from its anti-
static bag.
• Handle a board by its edges only; do not touch its components, periph-
eral chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the serverboard, add-on cards and peripherals back into their anti-
static bags when not in use.
Unpacking
The serverboard is shipped in antistatic packaging to avoid static damage.
When unpacking the board, make sure the person handling it is static pro-
tected.
Chapter 5: Advanced Serverboard Setup
Chapter 5
5-1
All serverboard jumpers and
Advertisement
Table of Contents
