About This User Guide - Autoscript LED8TFT-ME User Manual

Led 8 inch tft on-camera prompter

Hide thumbs

Table Of Contents

Table of Contents

Mounting and Installation

WARNING! Before attempting to install or adjust the

prompter assembly, the tilt axis of the head support must be

securely locked horizontally.

WARNING! Do not install this product onto a camera

support or other equipment that is not designed to support

the weight of the product and its payload.

WARNING! Always ensure that all power and auxiliary

communications cables are routed so that they do not

present any danger to personnel. Take care when routing

cables in areas where robotic equipment is in use.

Water, Moisture and Dust

WARNING! Protect the product from water, moisture and

dust. The presence of electricity near water can be

dangerous.

WARNING! When using this product outside, protect from

rain using a suitable waterproof cover.

Ventilation

WARNING! Slots and openings are intended for ventilation

purposes to ensure reliable operation of the product, and

protect it from overheating. Do not block or cover any slots

and openings.

Operating Environment

CAUTION! The product should not be used outside the

operating temperature limits. Refer to the product technical

specifications for the operating limits for the product.

Safety and About this Manual

Cleaning

WARNING! Risk of electric shock. Always disconnect and

isolate the product from the power supply before cleaning.

CAUTION! Do not use solvent or oil-based cleaners,

abrasives or wire brushes.

Maintenance

WARNING! Servicing or repair of this product must only be

performed by qualified and trained electrical engineers.

WARNING! The fitting of non-approved parts and

accessories, or the carrying out of non-approved alterations

or servicing can be dangerous and could affect the safety of

the product. It may also invalidate the terms and conditions

of the product warranty.