Table of Contents
Advertisement
TRANSPORTING
5.30
Ensure the machine is turned off and the spark plug HT lead cap has been removed.
5.31
Make sure no fuel is allowed to leak during transport.
5.32
Secure the machine so it will not move during transport.
5.33
Always carry the machine by the handles.
8. STORAGE
WARNING
It is important to follow proper storage instructions to prevent deposits in the
carburetor.
This will cause starting difficulties and may cause permanent damage.
6.0
Perform all the general maintenance from the maintenance section of your manual.
6.1
Clean the outside of the machine.
6.2
Remove all the fuel from the fuel tank
6.3
After the fuel has been removed, start the engine and allow it to run at idle until the
engine stops to remove all the fuel from the carburetor.
6.4
Allow the engine to cool down.
6.5
Remove the spark plug and pour 1 teaspoon of clean fresh 2 stroke engine oil into
the combustion chamber.
6.6
Slowly pull the starter rope several times to allow the oil to coat internal components.
6.7
Replace the spark plug.
6.8
Store the machine in a cool, dry place away from any source of ignition.
19
Advertisement
Table of Contents
