Table of Contents
Advertisement
3. QUICK START GUIDE
CAUTION
This guide is meant to serve as a quick reference for operating your P1PE Earth
Auger.
We ALWAYS advise reading the manual in full before operation.
CAUTION
For OUTDOOR use ONLY.
Petrol machinery produces Carbon Monoxide - a poisonous, colourless and
odourless gas that can cause serious injury or death. Petrol is highly flammable,
always handle with extreme care and in a well ventilated area.
2.0
Select one of the three auger bits to be fitted.
2.1
Slot the auger shaft (1) over the end of the power unit drive shaft (2).
2.2
Align the hole in the shaft with the holes in the auger bit.
2.3
Pass the shaft locking bolt (3) through the auger and shaft then secure with the
locking pin (4).
(3) Locking Bolt
(1) Auger Shaft
(4) Locking Pin
(2) Drive Shaft
9
Advertisement
Table of Contents
