Table of Contents
Advertisement
4.10
Keep the engine, exhaust and muffler free of grass, leaves, excessive grease or
carbon build up to reduce the chance of a fire hazard.
4.11
NEVER pour or squirt the unit with water or any other liquid. Keep handles dry, clean
and free from debris. Clean the machine after each use.
4.12
DO NOT allow persons unfamiliar with the machine or these instructions to operate
it. This machine is extremely is dangerous in the hands of untrained users.
4.13
Thoroughly inspect the area to be worked, keep the working area clean and
free of debris to prevent tripping. Operate on a flat level ground.
4.14
NEVER place any part of your body where it would be in danger if movement
should occur during assembly, installation, and operation, maintenance, repairing or
moving.
4.15
Keep all bystanders, children, and pets at least 23m (75 feet) away. If you are
approached, stop the unit immediately.
4.16
The operator or user is responsible for preventing accidents or hazards
occurring to other people, their property, and themselves.
4.17
Start the engine carefully according to instructions.
4.18
Before starting the auger, make sure that the area to be drilled is free of all
underground obstacles such as power cables, water and drainage pipes.
4.19
NEVER place your hands, feet, or any part of your body into the auger drill bit
whilst the machine is rotating.
4.20
NEVER allow an accumulation of earth or drilled material to build up on the
earth auger drill bit, this will prevent proper discharge from the hole and will make the
auger heavy to handle.
4.21
NEVER attempt to unclog either the auger drill bit while the engine is running.
Immediately shut off the engine. Allow the auger drill bit to come to a complete stop.
Remove the clogged material. Inspect for damage and check for any loose parts for
repair or replacement.
4.22
Whenever you leave the operating position or if you have to remove
processed material, leaves or debris from the machine, You MUST always shut
down the engine, disconnect spark plug HT lead cap, keeping them away from the
spark plug to prevent accidental starting, and wait for all moving parts to come to a
complete stop.
.
4.23
ALWAYS stop the engine before moving the machine.
4.24
You MUST keep all combustible materials and substances away from the
engine when it is hot.
4.25
NEVER cover the machine while the muffler is still hot.
4.26
NEVER operate the machine on slopes.
13
Advertisement
Table of Contents
