5. Installation and operation
5.1 Installation
Unpacking
Unpack the device and check the delivery completeness. Delivery include
the following elements:
1 x upper lamp holder with 3 factory-assembled
aluminium reflectors and 3 infrared lamps;
2 x lower frame
2 x mounting screw
1 x installation instructions
Remove and dispose of all package material according to the environment
protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.
Assembly
The assembly of the device should be carried out in the following steps (see figure).
6
Place the upper lamp holder (3) on the lower frame tube 96).
-
Screw the upper lamp holder with the factory-assembled infrared lamps (3) and
-
lower frame (6) left and right using mounting screws (5).
The device is ready for use.
-
- 28 -
3
5
6
5