Bartscher I3WL820 2/1 GN Manual page 6


Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.

The supply cable must be disconnected from the socket
only by pulling the plug.

Never carry or lift the device by the supply cable.

In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.

Never immerse the appliance, the power cord and the power
plug in water or other liquids.

Do not use any acid agents and make sure no water ingresses
the device.

Never operate the device with moist hands or standing on wet
floor.

Remove the plug from its socket:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the instructions below.

During operation the ventilated aluminium reflectors, infrared
lamps and upper part of the frame become very hot. You must
not touch these parts. Use appropriate protective gloves to
handle the food products.
- 21 -