Count Up Timer - Electrolux EOC5640 User Manual

Clock function
END
Press again and again to
switch between the clock
functions.
To confirm the settings of
the clock functions, press
or wait 5 seconds for an
automatic confirmation.
6.2 Setting the DURATION or
END
1. Press again and again until the
display shows
or flashes in the display.
2. Press or
and press to confirm.
For Duration first you set the minutes
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
and time setting flash in the display. The
oven stops.
3. Turn the knob for the oven functions
to the off position.
4. Press any button or open the oven
door to stop the acoustic signal.
If you press
the hours for DURATION
, the appliance goes to
setting of the END
function.
6.3 Setting the MINUTE
MINDER
1. Press .
Application
To set when the appliance must deactivate. Use on‐
ly when an oven function is set. You can use Dura‐
tion and End at the same time (time delay), if the ap‐
pliance is to be activate and deactivate automatical‐
ly later.
or .
to the set the values
first you
or symbol
when you set
and "00" flash in the display.
2. Press or
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
symbol comes on in the display.
The appliance now calculates the time in
hours and minutes.
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
Press any button or open the oven
door to stop the acoustic signal.
If you set the MINUTE
MINDER when the
DURATION
function operates, the
symbol comes on in the
display.

6.4 Count Up Timer

Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to
heat.
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
The Count Up Timer cannot
be used with the functions:
Duration
ENGLISH
to set the MINUTE
flash in the display.
or END
, End .
11