Setting The Duration; Setting The End; Count Up Timer; Using The Accessories - Electrolux EOC5400AOX User Manual

To change the time of day press
again and again until the indicator for the
time of day

6.3 Setting the DURATION

1. Set an oven function.
2. Press
starts to flash.
3. Press
and the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.

6.4 Setting the END

1. Set an oven function.
2. Press
starts to flash.
3. Press
the minutes for END time.
4. Press
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.

7. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
flashes in the display.
again and again until
or to set the minutes
to confirm.
and time
again and again until
or to set the hours and
to confirm.
and time setting flash
again and again until
3. Press or
and the hours for DURATION time.
4. Press to confirm. The display
shows flashing
5. Press or
the minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and time setting flash in the display.
The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
6.6 Setting the MINUTE
MINDER
1. Press again and again until
and "00" flash in the display.
2. Press or
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.

6.7 COUNT UP TIMER

To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.

7.1 Inserting the accessories

Wire shelf:
ENGLISH
to set the minutes
.
to set the hours and
to set the MINUTE
flash in the display.
11