Electrolux EOC5640 User Manual page 26

26 www.electrolux.com
Problem
The display shows "F102". • You did not fully close
The display shows an error
code that is not in this ta‐
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
10.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
Possible cause
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
The demo mode is activa‐
ted.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
Remedy
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
1. Deactivate the oven.
2. Press and hold the but‐
ton .
3. When an acoustic sig‐
nal sounds, turn the
knob for the oven func‐
tions clockwise to the
first function. "Demo"
flashes in the display.
4. Turn the knob for the
oven functions to the
off position.
5. Release the button
6. Turn the knob for the
temperature clockwise
and hold it for three
seconds. The acoustic
signal sounds three
times. The demo mode
is deactivated.
.