Table of Contents
Advertisement
7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
and
at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
7.2 Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch
again and again until the
display shows
display.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
to confirm.
5.
Use
or
to set the hours for
DURATION.
If you touch
set the DURATION, the appliance
switches to the setting of the END
function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field or open the oven
door to stop the acoustic signal.
7.
Deactivate the appliance.
7.3 Setting the END
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch
again and again until the
display shows
display.
3.
Use
or
to set the END (first
you set the minutes and then the
hours) and
or
4.
When the set time ends, an acoustic
signal sounds for two minutes.
.
flashes in the
or
while you
.
flashes in the
to confirm.
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5.
Touch a sensor field or open the oven
door to stop the acoustic signal.
6.
Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION function,
two minutes before the end of cooking an
acoustic signal sounds and the lamp acti-
vates. The appliance goes to the setting
of the END or DURATION function. During
these two minutes you can examine the
results of the cooking, and, if necessary,
add the END or DURATION time.
7.5 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This func-
tion has no effect on the operation of the
oven. You can set the MINUTE MINDER
at any time and also when the appliance
is off.
1.
Touch
.
and "00" flash in the
display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
or the MINUTE MINDER
starts automatically after five sec-
onds.
4.
When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and
flash in the display.
5.
Touch a sensor field or open the oven
door to stop the acoustic signal.
7.6 Setting the Time delay
function
The DURATION
and END
can be used at the same time, if the oven
is to be activated and deactivated auto-
matically later. In this case, first set the
DURATION
and then the END
function (refer to "Setting the DURATION"
and "Setting the END" ).
When the Time delay function is activated,
the display shows a static symbol of the
ENGLISH
13
functions
Advertisement
Table of Contents
