Related Manuals for ReSound Match Series
Summary of Contents for ReSound Match Series
- Page 1 Technical Manual ReSound Match ITE GN ReSound as Global Technical Operations Lautrupbjerg 7 • DK-2750 Ballerup • Denmark E-Mail: Service@gnresound.dk...
-
Page 2: Table Of Contents
Doc. No. 0175820 rev. F Table of contents Subject Page Matrix ......................3 Spare Part List ....................4 Faceplate Assemblies ..................5 Blank Faceplates.................... 6 Hybrid Connections ..................7 Diagram....................... 8-9 Receiver assembly ..................10 Prepare the faceplate ................11-12 Options ...................... -
Page 3: Matrix
Matrix Doc. No. 0175820 rev. F C3.1 Battery Normal Power Single Mic L-TRIMMER P-TRIMMER H-TRIMMER Push Button Telecoil Size 13 (floating) MA50-P Standard Optional Opional Optional Not Optional Not Optional MA2T50-P Standard Standard Standard Optional Not Optional Not Optional MA3T50-P Standard Standard Standard... -
Page 4: Spare Part List
Spare Part list Doc. No. 0175820 rev. F Item Part No. Option Part No. Tubing,Q-flex,.100”ID X.120”OD 10038801 Trimmer,L,150K,PJ63,Green 16667500 Tape, 3m., Doubleface (56X3.9MM) 10038905 Trimmer,H,150k,PJ63,Yellow 16667600 Wrap for BK1610 receiver 15414300 Trimmer,P,150K,PJ63,Black 16667700 Novec EGC-1700 (coat), 100 ml. 15290401 Flex-Hybrid, C3.1, Denmark 16016900 Analog VC Complete Part No. -
Page 5: Faceplate Assemblies
Faceplate Assemblies Doc. No. 0175820 rev. F VC, 2 Trimmer - Left, HP VC, 3 Trimmer - Left, HP VC, No Trimmer - Left, HP Page 5 of 16... -
Page 6: Blank Faceplates
Blank faceplates Doc. No. 0175820 rev. F 13 FLT VC - Right 13 FLT VC - Left Blank FP Single mic. Part No. Battery Door 13 Part No. FP, 13, FLT VC, Light (L) 15185050 Batt Door Left, Light 15185120 FP, 13, FLT VC, Medium (L) 15185051 Batt Door Left, Medium... -
Page 7: Hybrid Connections
Hybrid connections (C3.1 Flex) Doc. No. 0175820 rev. F MIC - BATT - MIC(0) REC + MIC + REC - BATT + MODULE MODULE NOTE : Coating EGC-1700 or SL1367 peters Page 7 of 16 coat must be added after soldering. -
Page 8: Diagram
Diagram - ITE Left Doc. No. 0175820 rev. F Page 8 of 16 NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering. - Page 9 Diagram - ITE Right Doc. No. 0175820 rev. F Page 9 of 16 NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering.
-
Page 10: Receiver Assembly
Receiver assembly Doc. No. 0175820 rev. F BK1610 rec: Place foam- wrap p/n 15414300 as BK1610 rec. wires are to shown. be routed as shown. NOTE : Coating EGC-1700 or SL1367 peters coat must be added after soldering. Page 10 of 16... -
Page 11: Prepare The Faceplate
Prepare the faceplate - Trimmer Installation Doc. No. 0175820 rev. F Drill target hole. Remove debris and Mark target hole. insert trimmer, NOTE : Do the same process for additional trimmers. Let the glue cure first then operate the trimmer to ensure that it is not frozen. -
Page 12: Prepare The Faceplate
Prepare the faceplate - VC Installation Doc. No. 0175820 rev. F Drill target hole. Remove debris and insert Mark target hole. Analog VC NOTE : Let the glue cure first then operate the VC to ensure that it is not frozen. Drill bit 0.159”... -
Page 13: Options
Options Doc. No. 0175820 rev. F L - TRIMMER H - TRIMMER P - TRIMMER Note: If a trimmer is opted to be added / removed, the device must be reconfigured in the AUDIOMaster or the Match Configuration Tool software to reflect correct option added / removed. The Match Configuration Software can be downloaded from the GTO website: http://gto.gnresound.com Page 13 of 16... -
Page 14: Final Device
Final Device Doc. No. 0175820 rev. F 3 TRIMMER OPTION 2 TRIMMER OPTION Page 14 of 16... -
Page 15: Service Tool
Service Tool Doc. No. 0175820 rev. F The tool can be used on both sides. One side for size 13 and 312, the other side to be used for size 10 Size 10 Size 13 and 312 When working on the assembled faceplate a heat sink (p/n 10158701) must always be used in order to prevent damages to the components. -
Page 16: Test Equipment
Test Equipment Doc. No. 0175820 rev. F Both programming cable sets shown on this page can be used When testing / programming a battery pill must be used: The device is to be configured with either AUDIOMaster or MATCH Configuration Software for trimmer option changes.