Electromagnetic Compatibility - National Instruments SCC-FT01 User Manual

Feedthrough module

Hide thumbs Also See for SCC-FT01:

Table of Contents

For UL and other safety certifications, refer to the product label, or visit

Note

ni.com/hardref.nsf

appropriate link in the Certification column.

Electromagnetic Compatibility

Note

For full EMC compliance, operate this device with shielded cabling. In addition,

all covers and filler panels must be installed.

CE Compliance

Note

Refer to the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, visit

ni.com/hardref.nsf

appropriate link in the Certification column.

National Instruments™, NI™, ni.com™, and NI-DAQ™ are trademarks of National Instruments

Corporation. Product and company names mentioned herein are trademarks or trade names of their

respective companies. For patents covering National Instruments products, refer to the appropriate

location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.

, search by model number or product line, and click the

Emissions................................................EN 55011 Class A at 10 m

Immunity ................................................EN 61326:1997/ + A2:2001,

CE, C-Tick, and FCC Part 15 (Class A) Compliant

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety)..............73/23/EEC

Electromagnetic Compatibility

Directive (EMC) .....................................89/336/EEC

, search by model number or product line, and click the

FCC Part 15A above 1 GHz

Table 1

*371075B-01*

371075B-01

Mar04

Table of Contents