Easily solved problems
Problem
Problems in monitoring heart rate
with the chest band
Warning
There are high voltages inside the motor compartment, therefore the guard must be removed by authorised personnel only; only authorised
personnel can carry out internal repairs.
Cause
Other transmitters situated nearby.
Strong interference sources nearby.
Worn heart rate monitor chest band.
Chest band transmitter not making proper skin contact.
Damaged transmitter.
Remedy
Move the equipment far enough away to stop signal interference
(minimum distance between two units 80 cm).
Find the interference source (e.g. an electrical domestic
appliance) and move it away, or move the equipment.
Change the chest band.
Dampen the inside of the chest band with water.
Change the chest band.
20
SYNCHRO FORMA
Need help?
Do you have a question about the Synchro Forma and is the answer not in the manual?
Questions and answers