Re-Initiating Impact Detection Sequence; Automatic Registration Service (Ars); Selecting Or Changing The Ars Mode - Motorola APX 5500 User Manual

6875946M01-JK
Advanced Features
• Press the Menu Select button below Clr to exit.
2.8.10.5

Re-Initiating Impact Detection Sequence

Radio must first exit Emergency mode to re-initiate the Impact Detected sequence.
Radio must return to the normal operations before the next impact can be detected. Refer to
Impact Detected Condition on page 71
2.9

Automatic Registration Service (ARS)

This feature provides an automated data application registration for the radio. When you turn on the
radio, the device automatically registers with the server. Data applications within the fixed network
determine the presence of a device on the system and send data to the device.
The ARS for the radio consists of two modes:
• ARS Server Mode (default mode)
• ARS Non-server Mode
2.9.1

Selecting or Changing the ARS Mode

When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the radio menu:
a. Press and hold
b. Press the Menu Select button directly below Chan .
The display shows the current zone is not blinking, and the channel is blinking.
c. or or rotate the Mode Rocker to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
Repeat this step.
d. Press to confirm the displayed zone and channel.
• Selecting the ARS mode using the Mode Rocker :
a. After the zone you want is displayed, toggle until the display shows the required channel.
The display shows the current zone is not blinking, and the channel is blinking.
72
to exit the Impact Detected condition.
or to Chan .
Exiting