Stopping Ssa Notification Of All Available Sites; Channel Change On Off Hook On All Channels - Motorola APX 5500 User Manual

6875946M01-JK
Advanced Features
2.20.8

Stopping SSA Notification of All Available Sites

Procedure:
1 or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [All Avail] and press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req successful.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for all available sites stop.
2.21

Channel Change on Off Hook on All Channels

This feature enables the mode of the radio to be changed based on the HUB on/off-hook state on all
control heads.
Whenever the radio goes off-hook, the radio changes to a preprogrammed zone channel specifically
for off-hook state. When the user returns the radio to on-hook state, it reverts to its previous channel
zone before the radio goes off-hook.
When the radio is in off-hook state, manual mode change (including mode change triggered by third
party devices) is allowed. Radio reverts back to the last mode before off-hook once the radio goes on-
hook.
NOTICE: During PL Defeats and Suspend Scan during on-hook state, the radio is converted to
work in new channel and Channel Change on Off Hook feature is suspended until these
conditions end.
We do not recommend that "Hub Suspend Scan" and "Channel Change on Off Hook" to be
enabled simultaneously.
During Dynamic Regroup channel selector lock state, Emergency, Transmit Inhibit, radio lock,
or when external key loaded is attached to the radio, the Channel Change on Off Hook feature
is suspended until these conditions end.
The Off Hook State for APX
For Dual Radio, the state of the HUB on the unselected radio is always considered as on-hook. The
state of the HUB of the selected radio is always reflected as the actual states of the HUB. When the
HUB is placed off-hook, the selected radio makes channel change per CPS configuration, and the
unselected radio does not trigger channel change.
With Channel Change on Off Hook enabled, when the HUB is placed off-hook, and there is radio
switch, the new selected radio moves to the target channel zone on off hook, and the new
unselected radio reverts to the last user selected channel before off-hook.
110
Dual Radio Setup
™