User Login Feature; Logging In As A User - Motorola APX 5500 User Manual

b. or or rotate the Mode Rocker to the desired channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the User Login Indicator icon, the zone, and ARS
server channel.
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the zone, and
ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
Repeat this step.
c. Press to confirm the displayed zone and channel.
2.9.2

User Login Feature

This feature allows you as the user to be associated with the radio. With this association, every data
application (Example: Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
NOTICE: Valid characters for a username entry are capital letters (A–Z), small letters (a–z),
numbers (0–9), symbols (*, #, -, /), and the space character.
The maximum length for a username is eight characters. Usernames are not case sensitive in
server mode but are case sensitive in non-server mode.
A predefined username may sometimes be invalid because the programming software that is
used to set predefined usernames allows you to set usernames comprising of eight characters
or more.
2.9.2.1

Logging In as a User

Procedure:
1 or to User and press the Menu Select button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions.
• or to [ID Entry] and press the Menu Select button directly below Edit to enter ID.
A blinking cursor appears on the screen. Use the keypad to type or edit a user name. Press
the Menu Select button directly below Ok to submit.
• or to scroll through the list of predefined user names. Press the Menu Select button
directly below Sel to select the predefined user name.
• Press and hold
Press the Menu Select button directly below Logn to select the predefined user name.
If the selected predefined username has more than eight (8) characters, or an invalid character
in it, the display momentary shows Invalid ID.
3 Press the Menu Select button directly below PIN.
A blinking cursor appears beside PIN.
or to scroll through the list of predefined user names at a fast scroll rate.
6875946M01-JK
Advanced Features
73