Table of Contents
Advertisement
Installation
Fitting the upper covers
Fit the cover on the door hinge.
Fit the panel so that it clicks into
position.
Push on the outer cover .
Close the appliance door.
96
Aligning the appliance doors
The appliance door can be aligned with
the appliance housing after it has been
fitted.
In the following illustration, the appli-
ance door is not shown in the closed
position to make it easier to see what
you have to do.
To align the appliance door, use the
outer slots in the lower hinge plate:
Remove the middle screw from the
hinge plate.
Slightly loosen both outer screws .
Align the appliance door by sliding
the hinge plate to the left or right.
Then tighten the screws again. The
screw does not need to be refitted.
Advertisement
Table of Contents
