Table of Contents
Advertisement
Do not connect the refrigeration appli-
ance to a stand-alone inverter such as
those used with an autonomous energy
source, e.g. solar power.
When the refrigeration appliance is
switched on, power surges could result
in a safety switch-off. This could dam-
age the electronic module. The refriger-
ation appliance must not be used with
so-called energy-saving devices
either. These reduce the amount of en-
ergy supplied to the appliance, causing
it to overheat.
Connecting the appliance
Insert the plug connector into the
socket at the back of the refrigeration
appliance.
Make sure that the plug connector has
clicked into position correctly.
Insert the mains plug into the mains
socket and switch on.
The appliance is now connected to the
electricity supply:
will appear on the display.
Follow the steps described in "Switch-
ing on and off – Switching on".
Installation
101
Advertisement
Table of Contents
