Message
lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
Cause and remedy
There is a fault.
An appliance fault always has priority over any set-
tings which have just been selected. An appliance
fault has priority over any current door and/or temper-
ature alarms displayed.
To switch the alarm off touch in the display.
Call Service.
To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the dis-
play.
Confirm with
OK
In an emergency the appliance can be switched off
directly by the fault display.
Touch .
Problem solving guide
.
61