10. INSTALLING THE DUCTS
accessories, as described below. The boiler has been designed for connection to a
ducts using the accessory splitting kit.
WARNINGS
instructions are provided with the individual accessories.
C53
C63
TABLE 1A
the table to the side.
"SECTION" D
10.1 CONCENTRIC DUCTS
This type of duct is used to discharge exhaust fumes and draw
can also be used as a supplementary curve combined with a
duct must protrude at least 18 mm from the wall to allow an
•
•
•
10.2 SEPARATE DUCTS
This type of installation makes it possible to discharge exhaust
Comburent air can be drawn in at a different location from that
duct adaptor Ø 110 mm (B) and an air duct adaptor Ø 110 mm
(A
removed from the cap.
outlet ducts, adapting them to various requirements. It can also
be used as a supplementary curve combined with a duct or a
•
•
•
7690785.01 (1-05/18)
32
1.115 - 1.130
180
1.150
270