Edco TG-10 Operator's Instruction Manual
Turbo grinder
Hide thumbs
Also See for TG-10:
- Operator's instruction manual (12 pages) ,
- Operator's instruction manual (16 pages) ,
- Operator's instruction manual (20 pages)
Advertisement
Quick Links
E-TG10-I-0503
Operator's Instruction Manual
TG-10
Turbo Grinder
Available in Gasoline, Propane
and Electric Models
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Printed in USA
Fax (301) 663-1607 • 1-800-447-3326
©2003
TVW
Page 1
Website: www.edcoinc.com • E-mail: sales@edcoinc.com
Advertisement
Related Manuals for Edco TG-10
Summary of Contents for Edco TG-10
- Page 1 E-TG10-I-0503 Operator’s Instruction Manual TG-10 Turbo Grinder Available in Gasoline, Propane and Electric Models 100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA Phone (301) 663-1600 • 1-800-638-3326 Printed in USA Fax (301) 663-1607 • 1-800-447-3326 ©2003 Page 1 Website: www.edcoinc.com • E-mail: sales@edcoinc.com...
- Page 2 E-TG10-I-0503 READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT. Death or serious injury could occur if this machine is used improperly. SAFETY SAFETY MESSAGES • Do not disconnect power by pulling cord. To disconnect, grasp the plug, not the cord.
-
Page 3: Table Of Contents
Height Width Dimensions and specifications are approximate HOW TO ORDER REPAIR PARTS and subject to change. To insure product safety and reliability, always use genuine EDCO replacement parts when making repairs to the Model TG10-5B TG10-11H TG10-11P equipment. When ordering parts, please specify the MODEL and Length 41”/104cm... -
Page 4: Safety Guidelines
• The TG-10 Turbo Grinder is to be operated by a properly trained and qualified operator from a position at the rear of the machine. •... -
Page 5: Operation Instructions
• Inspect the work area: Inspect work area carefully before starting to grind. EDCO will not be held responsible for damage to the discs caused by striking protruding slab inserts, nails, screws, pipe extension, machinery bases, or other objects that transmit sudden shocks. - Page 6 Check all connections for tightness and inspect for leaks. If you detect a gas odor, immediately shut off the main fuel valve and consult a qualified LP-gas service person or call EDCO directly. NEVER check for leaks using an open flame;...
- Page 7 Most standard drum type units use a paper bag filter. The dust created during grinding is extremely fine and will clog the filter bag of these units and eventually damage the vacuums motor. In addition, damage to the TG-10 engine could occur. Figure 5 •...
- Page 8 • To achieve a smooth “polished” surface, complete the grinding operation with an EDCO dual disc unit using grinding stones or dyma serts.
-
Page 9: Maintenance Instructions
E-TG10-I-0503 Maintenance Follow the engine manufacturer’s guidelines for regular maintenance. Disconnect spark plug lead (Figure 10) before preform- ing any maintenance on this machine! Or on the electric model, unplug the electric cord at the machine (instead of at the wall) to assure the machine will remain un- plugged while you are working on it. - Page 10 Remove belt cover to expose belts. (Figure 13) • Loosen engine mounting bolts (Figure 14) on both sides of the TG-10 and slide engine to allow belts to slide off. • Replace worn belts with a complete set of new belts - even if only one belt is showing wear.
-
Page 11: Maintenance Schedule
E-TG10-I-0503 Read and follow the Repairs are to be done by engine manufacturer’s authorized EDCO Dealers only. maintenance schedule. Maintenance Schedule Inspect Entire Machine * Check Oil & Fuel Levels * Check Air Filter (Clean if Necessary) * Inspect Propane... -
Page 12: Limited Equipment Warranty
EDCO will not in any event be liable to the user, any successors in interest or any beneficiary or assignee This warranty, does not apply to failure occurring as a...
Need help?
Do you have a question about the TG-10 and is the answer not in the manual?
Questions and answers